MULTI-LAYER RACK BMR 3
The Multi-Layer Rack BMR is a fully-automatic inline solution for buffering layers after inline jogging and before the cutting process. It can work with automatic layer administration, i.e. ”first in - first out” or any other sequence. The vertical buffer space is only limited by the height of the ceiling.
MODEL | MAX. FORMAT | REAM HEIGHT |
---|---|---|
BMR 3 | 30.3 " x 42.1 " / 770 x 1070 mm | 6.3 " / 160 mm |
STANDARD FEATURES
Standard configuration with 10 buffer spaces (additional spaces optional)
One vertical transfer unit for loading or unloading (second unit optional)
AVAILABLE OPTIONS
Additional buffer spaces
Additional transfer unit
Automatic layer administration
Central computer for job administration
Barcode or QR code reader
Service module for remote maintenance
VERTICAL BUFFER SYSTEM BVP
This automatic buffer system eliminates time differences between jogging and cutting. The BVP needs very little space and allows for a constant workflow at the cutting system. It can work with a robotic system or in combination with a pusher system (loading) and a gripper systems (unloading).
MODEL | MAX. FORMAT | REAM HEIGHT |
---|---|---|
BVP 3 | 30.3 " x 42.1 " / 770 x 1070 mm | 6.3 " / 160 mm |
STANDARD FEATURES
5 vertically arranged buffer shelves
Stainless steel table top with strong air bed for buffer shelves
Motorized hoist system
Memory for sequence and storage occupancy
Safety fence or safety light guards (depending on floor layout)
AVAILABLE OPTIONS
Combination with other transport units (i.e. gripper system BFS)
Turn-table for 90º turning